| Model | MDR-60-5 | MDR-60-12 | MDR-60-24 | |
| Output | DC output Voltage | 5V | 12V | 24V |
| Voltage tolerance | ±1.0% | ±1.0% | ±1.0% | |
| Rated Current | 12A | 5A | 2.5A | |
| Related Power | 60w | 60w | 60w | |
| Wave&Noise | 80mVp-p | 120mVp-p | 150mVp-p | |
| Voltage adjust range | 5-6V | 12-15V | 48-56V | |
| Set up,rise time | 500ms 30ms/230VAC 1000ms,30ms/115VAC at full load | |||
| hold up time | 50ms/230VAC 20ms/115VAC at full load | |||
| Input | Voltage Range | 85 ~ 264VAC 47-63HZ 120-370VDC | ||
| Input Current | 0.55A/115VAC 0.35A/230VAC | |||
| Efficiency | 77% | 81% | 84% | |
| AC inrush current | Cold start current 35A/115V 70A/230VAC | |||
| Leakage current | <1mA/240VAC | |||
| Protection | Overload | Above 105%-160% rated output power | ||
| hiccup mode, recovery automatically after fault condistion is removed | ||||
| Over voltage | 6.25-7.25V | 15.6-18V | 57.6-64.8V | |
| Shut down o/p voltage, re-power on to recover | ||||
| Function | DC OK active single | Relay contact rating(max) :30V/1A resistive | ||
| Environment | Working temp humidity | -20~+70°C 20%~90%RH | ||
| Stor temp, humidity | -20~+85°C 20%~90%RH Non-condensing | |||
| Safety | safety standards | UL508,TUV EN60950-1 approved | ||
| Withstand voltage | I/P-O/P:3KVAC I/P-FG:2KVA O/P-FG:0.5KVA | |||
| Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25 %RH | |||
| EMC emission | Compliance to EN55011,EN55022,EN61204-3 class B,EN61000-3-2,-3 | |||
| Size | size | 40*90*100mm W*H*D | ||
| Package | 0.45kg, | |||
No. 108 Liuwengdong Rd, ShangChi Economic Development Area,Liushi Yueqing Wenzhou, Zhejiang, China
+86-18815133343
+86-13645875558